English
Deutsch
Tflex 380TG / Gap Filler 22x22 T: 2.03mm
Laird: Tflex 380TG / Gap Filler 22x22 T: 2.03mm Gap Filler Simple Rectangle 22 x 22 x 2.03 mm SPQ:81/405pcs
Prodejní cena bez DPH / ks
45,00 Kč
MNOŽSTEVNÍ SLEVY (cena za množstevní slevu se promítne v nákupním košíku) |
|
|---|---|
| 1 - 49 ks | 45,00 Kč bez DPH/ks |
| 50 - 99 ks | 35,00 Kč bez DPH/ks |
| Více než 99 ks | 26,60 Kč bez DPH/ks |
Laird: Tflex 380TG / Gap Filler 22x22 T: 2.03mm Gap Filler Simple Rectangle 22 x 22 x 2.03 mm SPQ:81/405pcs
the component, enhancing thermal transfer. The material has a very low compression
set enabling the pad to be reused many times. Tflex 300TG, in achieving its stellar
compliancy, does not sacrifice thermal performance. With a thermal conductivity of
1.2 W/mK, low thermal resistance can be achieved at low pressures.
A Tgard silicone liner has been added to the Tflex 300TG to offer a guaranteed
dielectric barrier. The Tgard™ is cut-through resistant and provides easier part handling
in mass production.
the component, enhancing thermal transfer. The material has a very low compression
set enabling the pad to be reused many times. Tflex 300TG, in achieving its stellar
compliancy, does not sacrifice thermal performance. With a thermal conductivity of
1.2 W/mK, low thermal resistance can be achieved at low pressures.
A Tgard silicone liner has been added to the Tflex 300TG to offer a guaranteed
dielectric barrier. The Tgard™ is cut-through resistant and provides easier part handling
in mass production.
| Název skladu | Dostupnost | Z toho rezervováno | Prodejní cena bez DPH | |
|---|---|---|---|---|
| ATD hlavní sklad | 711 | 0 | 45,00 Kč |
Laird THR-DS-Tflex 300TG 0611 The high rate of compliancy of Tflex 300TG allows the material to “totally blanket”
the component, enhancing thermal transfer. The material has a very low compression
set enabling the pad to be reused many times. Tflex 300TG, in achieving its stellar
compliancy, does not sacrifice thermal performance. With a thermal conductivity of
1.2 W/mK, low thermal resistance can be achieved at low pressures.